Candle burn time calculator
How long will my candle burn?
Enter the wax weight in your candle for a quick estimate, or add the numbers from a burn test for a figure based on your own candle. The calculator gives total burn hours and how many burns that makes.
Enter the wax weight, hours per burn and, for a burn test, a weight after the test that is lower than the weight before.
A rough guide only. Wick, wax and fragrance change the burn rate, so run a burn test for a figure you can put on a label.
How the calculator works
The rule of thumb uses Makesy's rough guide that candles burn for about 7 to 9 hours per ounce of wax. It's a starting point, not a measurement: wick, wax and fragrance all change how fast a candle burns.
Burn time ≈ wax weight in oz × 7 to 9 hours
The burn test method is how suppliers such as Supplies for Candles and Wholesale Supplies Plus calculate burn time. Burn the candle for a few hours, weigh how much wax it used, and scale that up to the whole candle.
Burn rate = (weight before − weight after) ÷ hours burned
Burn time = wax weight ÷ burn rate
Number of burns = burn time ÷ hours per burn, rounded down
Worked example using assumed inputs. A candle with 8 oz of wax weighs 15 oz in its jar before a 4-hour test and 14.5 oz after. It used 0.5 oz in 4 hours, a burn rate of 0.125 oz per hour, or 8 hours per ounce. 8 oz ÷ 0.125 oz per hour = 64 hours, or 21 burns of 3 hours. The rule of thumb gives 56 to 72 hours for the same candle. Actual results depend on your materials.
Supplies for Candles' own example works the same way in grams: a 200 g candle that loses 16 g in 4 hours burns 4 g per hour, so about 50 hours in all.
Rough burn time by wax weight
| Wax in the candle | Rough burn time | Burns of 3 hours |
|---|---|---|
| 3 oz85 g | 21–27 hours | 7–9 |
| 6 oz170 g | 42–54 hours | 14–18 |
| 8 oz227 g | 56–72 hours | 18–24 |
| 12 oz340 g | 84–108 hours | 28–36 |
| 16 oz454 g | 112–144 hours | 37–48 |
At 7 to 9 hours per ounce. Use the wax weight, not the jar size: an 8 oz jar holds less than 8 oz of wax. The candle wax chart lists the wax for common jar sizes. Test your own candle before you print a burn time on a label.
How to run a burn test
- Let the candle cure first, so the test matches what a customer will get. See how long to cure candles.
- Weigh it. Weigh the empty jar before you pour, so you know the wax weight. Then weigh the finished candle.
- Trim and light. Trim the wick to about ¼ inch and place the candle on a level surface away from drafts.
- Burn for 3 to 4 hours, long enough for a full melt pool. Wholesale Supplies Plus says longer tests give more accurate results.
- Cool and weigh again. Let the wax set completely, then weigh the candle the same way as before.
- Repeat. Supplies for Candles says the first test can be less accurate, so test more than once, and check the candle burns cleanly without tunneling or soot.
For the most accurate figure, do a full burn test instead: Nature's Garden suggests burning in 2 to 3 hour sessions and counting the burns until the candle goes out on its own. Record the results on the candle recipe sheet.
What changes burn time
- Wick size. A wick that's too big makes a larger flame and burns wax faster. Makesy notes a too-wide wick can make the melt pool too deep and shorten the candle's life. See the wick size guide.
- Wax, fragrance and colour. Supplies for Candles says all of these affect burn time, so one figure may not fit every candle in a range.
- Drafts and temperature. Fans and breezes make a candle burn faster, and Wholesale Supplies Plus notes very hot or cold rooms affect it too.
- Number of wicks. More wicks melt wax faster, so a double wick candle needs its own test.
Burning and labeling tips
- Burn no more than 4 hours at a time, and stop when about ½ inch of wax is left, as the National Candle Association advises.
- Round down on the label. Nature's Garden recommends lowering the estimate slightly for the wax left in the jar when the candle goes out.
- Say "approximately". A burn time is an estimate, so present it as one, for example "approx. 50 hours". For what else goes on the label, see candle label requirements.
Frequently asked questions
How do you calculate candle burn time?
Weigh the candle, burn it for 3 to 4 hours, and weigh it again. Divide the wax used by the hours burned to get the burn rate, then divide the candle's total wax weight by that rate.
How many hours does an 8 oz candle burn?
A candle with 8 oz of wax burns roughly 56 to 72 hours, using Makesy's rule of 7 to 9 hours per ounce. An 8 oz jar holds less wax than that, so it will be a little shorter. A burn test gives the real figure.
How long does a candle burn per ounce?
Makesy gives a rough guide of 7 to 9 hours per ounce of wax. Your own candle may differ, depending on the wick, wax, fragrance and room.
Why is my candle burning so fast?
The usual causes are a wick that's too big, a wick that's too long, or a draft. Trim the wick to about ¼ inch, keep the candle away from fans and vents, and try the next wick size down if the flame stays large.
Should I include the jar weight?
For the burn rate, it doesn't matter, as long as you weigh the same way before and after. For the total burn time, use the wax weight only, without the jar.
Need the wax weight first? The wax & fragrance calculator estimates how much wax your jar holds.