Room spray calculator

How much fragrance oil, spray base and water for room spray?

Enter your bottle size, how many bottles you're filling and your fragrance load. The calculator splits the batch into fragrance oil, room spray base and water, using the common 4 parts base to 1 part fragrance method.

Bottle size in
fl oz
%
parts

5% is CandleScience's recommended load. Its calculator goes from 3% to 10%. The 4 to 1 ratio is for CandleScience's EcoBase room spray base; if your base's directions give a different ratio, enter it here.

Show weights in

Batch: 6 bottles

Fragrance oil
35.5 g
1.25 oz
Room spray base
142 g
5.01 oz
Distilled water
532 g
18.78 oz
Total batch
710 g
about 710 ml in all

Per bottle

Fragrance oil5.9 g
Room spray base23.7 g
Distilled water88.7 g
Fill each bottle with118 g

5.0% fragrance, 20.0% spray base, 75.0% water.

How the calculator works

Room spray is mostly water, so the calculator treats 1 ml as about 1 g. CandleScience fills its 4 fl oz bottles with 118 g, which matches. It then follows CandleScience's two-step method: mix 4 parts room spray base with 1 part fragrance to make a solution, then make the rest of the batch up with water.

Fragrance oil = batch weight × fragrance load
Spray base = fragrance oil × 4
Water = batch weight − fragrance oil − spray base

Worked example using assumed inputs. Six 4 fl oz bottles at 5% make a 710 g batch: 35.5 g fragrance oil, 142 g spray base and 532 g water, or 118 g per bottle. That matches CandleScience's own six-bottle recipe of 35 g fragrance, 142 g base and 531 g water. Actual results depend on your materials.

How to make room spray

  1. Clean everything. Wash your pitcher, beaker and bottles in warm soapy water and dry them. Use glass to measure fragrance oil, since CandleScience notes it can eat through paper and some plastics.
  2. Weigh the spray base into a pouring pitcher.
  3. Weigh the fragrance oil and stir it into the base until the mixture is clear.
  4. Weigh the water and add it to the base and fragrance, mixing thoroughly. CandleScience says the mix may look cloudy, frothy or tinted, which is normal.
  5. Fill the bottles, leaving some headspace for expansion in warm weather, and fit the sprayers.
  6. Label and rest. NI Candle Supplies suggests letting the spray sit for 24 hours before use. Shake before each use.

Weighing in grams is the most accurate. When you sell, label the bottle by volume, in fl oz and ml.

Without a room spray base

Fragrance oil won't mix with plain water. A ready-made room spray base contains a solubilizer that holds the oil in the water, which is why it's the simplest route. If you mix your own with a solubilizer such as polysorbate 20, the amount needed varies by fragrance. Soap Queen's recipe, for example, stirs the solubilizer and fragrance together and adds a few more drops if the mix looks milky. A water-based spray you mix yourself also needs a preservative. Soap Queen warns that without one, mold and bacteria can grow. This calculator is set up for the base method, so follow your recipe's ratios if you make your own.

Safety and testing

  • Test on fabric first. CandleScience recommends patch testing linens, especially above a 5% fragrance load. NI Candle Supplies also advises avoiding polished wood, leather and electronics.
  • Check the fragrance is suitable. NI Candle Supplies notes that room sprays fall under IFRA category 10B, so check each fragrance oil's IFRA certificate for its room spray limit.
  • Store well. Use distilled water for longer shelf life, and keep bottles somewhere cool and dark.
  • Label for sale. Include usage and safety directions, and follow the labeling rules where you sell. NI Candle Supplies points UK sellers to CLP labels.

For candle, wax melt and reed diffuser recipes, use the wax & fragrance calculator the wax melt calculator, or the reed diffuser calculator.

Frequently asked questions

How much fragrance oil do you put in room spray?

About 5% of the total weight is a common starting point. CandleScience recommends 5%, and NI Candle Supplies uses 5 ml of fragrance per 100 ml bottle. Check each oil's IFRA limit for room sprays.

What is the ratio for room spray?

With CandleScience's EcoBase, mix 4 parts base to 1 part fragrance, then add 3 parts water to every 1 part of that mixture. At a 5% fragrance load that works out to 5% fragrance, 20% base and 75% water.

How much fragrance oil for a 4 oz room spray?

At 5%, about 6 g (0.21 oz) of fragrance oil, with about 24 g of spray base and 89 g of water, for a 118 g fill.

Why is my room spray cloudy?

Some cloudiness is normal. CandleScience says room spray can look cloudy, frothy or tinted after the water goes in. If oil separates and floats, the spray needs more solubilizer or base for that fragrance.

Can I use candle fragrance oil in room spray?

Only if the oil is approved for room sprays. Check the fragrance oil's IFRA certificate for its room spray (category 10B) limit, and test the finished spray on fabric before you use or sell it.

Sources: 4 to 1 method, 5% load, scaling, 118 g fill, mixing, headspace and fabric testing from CandleScience: scaling room and linen spray and CandleScience: how to make room and linen spray; 24-hour rest, surfaces, IFRA category and labeling from NI Candle Supplies: how to make room sprays that last; solubilizer and preservative from Soap Queen: springtime room spray.