Reed diffuser calculator

How much fragrance oil and diffuser base for a reed diffuser?

Enter your bottle size, how many bottles you're filling, how full you fill them and your fragrance load. The calculator splits the batch into fragrance oil and reed diffuser base, by weight.

Bottle size in
fl oz
%
%

Suppliers suggest 10% to 25% fragrance; 20% is a common middle. Check your diffuser base's maximum and the fragrance's IFRA limit. Leaving some space at the top makes room for the reeds.

Show weights in

Batch: 6 bottles

Fragrance oil
128 g
4.51 oz
Diffuser base
511 g
18.03 oz
Total batch
639 g
about 639 ml in all

Per bottle

Fragrance oil21.3 g
Diffuser base85.2 g
Fill each bottle with106 g

20.0% fragrance oil, 80.0% diffuser base, within the 10–25% suppliers suggest.

How the calculator works

Suppliers measure reed diffusers by weight. Candle Shack weighs both the base and the fragrance on electric scales, and CandleScience weighs its fragrance and base into a pitcher on a scale. Diffuser bases and fragrance oils weigh close to 1 g per ml, so the calculator treats 1 ml of bottle space as about 1 g. Your oil and base may be a little lighter or heavier, which is one reason to leave some space at the top.

Fill per bottle = bottle size × fill level
Fragrance oil = fill × fragrance load
Diffuser base = fill − fragrance oil

Worked example using assumed inputs. Six 4 fl oz bottles filled to 90% at 20% fragrance make a batch of about 639 g: 128 g fragrance oil and 511 g diffuser base. That's 21 g fragrance and 85 g base, or 106 g in all, per bottle. Actual results depend on your materials.

The split matches CandleScience's own recipe. It fills a 6.7 oz bottle with 6 oz of mixture at 25%: 1.5 oz fragrance oil and 4.5 oz base, the same 25 to 75 split the calculator uses at a 25% load.

Choosing a fragrance load

SourceFragranceNotes
NorthWood10–20%10% for a good scent throw, 20% for a stronger one. Very strong oils may need less than 10%.
Candle Shack15%Starting point: 15 g fragrance oil to 85 g base for a 100 ml diffuser. 10–15% for essential oils.
Supplies for Candles20%80% base and 20% fragrance oil, about four parts base to one part oil.
CandleScience25%Its tutorial uses a fragrance rated for diffusers up to 25%.

NorthWood says most reed diffuser bases hold 20% to 40% fragrance, depending on the brand. Its own base holds up to 50%, but it notes a 50:50 mix would smell overpowering with most fragrances. Start in the 15% to 20% range, test, and adjust. The limit that matters most is the fragrance's own: NorthWood and Candle Shack both point to category 10A on the fragrance's IFRA certificate as the maximum for diffusers.

How to make a reed diffuser

  1. Clean your tools and workspace. CandleScience suggests isopropyl alcohol, soap and water.
  2. Weigh the diffuser base into a pouring pitcher on a scale.
  3. Add the fragrance oil without taring the scale, so the total reads the full fill weight.
  4. Stir gently until the mixture is fully blended. Candle Shack says the diffuser is ready once the solution is mixed and clear.
  5. Fill the bottle with a funnel, leaving room for the reeds.
  6. Add the reeds, wait for the oil to soak into them, then flip them so the soaked ends are at the top. Fit a stopper instead if the diffuser won't be used straight away.
  7. Label the bottle with a warning label.

How many reeds per bottle

BottleReedsSource
100 mlAbout 8 thin reedsCandle Shack
165 ml6 thick reedsCandle Shack
6.7 oz (about 200 ml), filled to 6 oz6 to 8 reedsCandleScience
Small to medium diffuser5 to 8 reedsSupplies for Candles

NorthWood's rule is to use enough reeds to fill the opening comfortably without forcing them in. More reeds release scent faster but empty the bottle sooner. Reeds should stand at least as tall above the bottle as the bottle itself, so a 5 inch bottle suits standard 10 inch reeds. Fibre reeds are the current standard. NorthWood says wood and bamboo sticks don't work because they aren't porous enough. Candle Shack notes that fibre reeds give a stronger throw and rattan a subtler one.

Making it last

  • Flip the reeds when the scent fades. Supplies for Candles suggests about once a week. NorthWood says it isn't necessary with its fibre reeds.
  • Size and strength matter. NorthWood says a diffuser can last up to a year, depending on the fragrance load and bottle size. Larger bottles last longer.
  • Use new reeds for each fill. Used reeds are saturated with the old fragrance and can clog.
  • Choose a narrow-neck bottle with a wide base. NorthWood says wide-mouth jars and narrow-base vases aren't suitable.

Safety and selling

  • Check the IFRA certificate for each fragrance oil's diffuser limit before you set the load.
  • Mind spills. NorthWood notes spilled oil makes surfaces slippery and suggests wearing gloves while mixing.
  • Keep out of reach of children and pets, and use a stable bottle that won't tip.
  • Label for sale. Supplies for Candles says sellers must follow local home fragrance rules, label ingredients and keep safety data records. Check your fragrance supplier's safety data sheet for the warnings to include.

For candles, use the wax & fragrance calculator. For a water-based spray, use the room spray calculator.

Frequently asked questions

What is the ratio of fragrance oil to diffuser base?

A common ratio is 20% fragrance oil to 80% diffuser base, or about 1 part oil to 4 parts base. Suppliers range from 10% to 25%, within what your base can hold and the fragrance's IFRA limit.

How much fragrance oil for a 100 ml reed diffuser?

For 100 g of mixture, about 15 g fragrance oil and 85 g base at 15%, or 20 g fragrance oil and 80 g base at 20%. Fill to about 90% and the amounts drop to 13.5 g and 76.5 g at 15%.

How many reeds should I put in a diffuser?

Usually 5 to 8. Candle Shack suggests about 8 thin reeds for 100 ml, and CandleScience uses 6 to 8 in a 6.7 oz bottle. More reeds give a stronger scent but use up the oil faster.

Can I make a reed diffuser without a diffuser base?

A ready-made reed diffuser base is the simplest option, because it's made to carry fragrance up the reeds. The ratios on this page are for a diffuser base, so if you use something else, follow that recipe's own amounts and safety advice.

How long does a homemade reed diffuser last?

NorthWood says up to a year, depending on the fragrance load and bottle size. More reeds shorten it, because they release the scent faster.

Sources: 6 oz recipe at 25%, weighing method, 6 to 8 reeds, cleaning and labels from CandleScience: how to make reed diffusers; 10–20% range, base capacity and IFRA category from NorthWood: diffuser base to fragrance ratio; reed count rule, reed length, reed types, lifespan, bottle shape and safety from NorthWood: reed diffuser FAQ; 15% starting recipe, essential oils, reeds per bottle size and weighing from Candle Shack: diffuser tips; 80/20 ratio, 5 to 8 reeds, flipping and selling notes from Supplies for Candles: how to make a reed diffuser.