Free printable

Printable candle testing sheet and batch recipe log

Last reviewed November 2026

Batch record

Date and batch name
Container or mold (name, size)
Water to fill line, one container
Wax (name, supplier, lot)
Wax factor used (default 0.86)
Fragrance oil (name, supplier)
Fragrance load, and basis (☐ wax weight ☐ total weight)
Wick (series, size) or wooden wick
Dye or additives
Number of candles or molds
Per unit: pour weight / wax / oil
Extra for spills (%), counted once
Batch: wax / oil weighed out
Temperatures: melt / add oil / pour
Room temperature, jar warmed?
Cure: start date / days
Notes (tops, wet spots, frosting, first burn)

Burn test log

BurnHoursMelt pool to edge?Flame heightSoot or mushroomingScent
1
2
3
4

Example entry using fictional observations: burn 1, 60 minutes, a 6 mm rim of solid wax, flame about 12 mm, no visible soot at that check, light scent. Record the time alongside what you observe. A single entry does not establish a safe wick size. The filled PDF shows how to pair the entry with its batch.

How to fill it in

These are the same formulas the calculators use, with fragrance measured as a percentage of wax weight:

Pour weight = water weight × wax factor
Wax = pour weight ÷ (1 + fragrance load)
Fragrance oil = wax × fragrance load
Batch = per unit × number of units × (1 + spill allowance)

If your supplier rates the load as a percentage of total weight, use fragrance oil = pour weight × load and wax = pour weight − fragrance oil instead, and tick "total weight" on the sheet. The difference is explained, with a side-by-side example, in how much fragrance oil to add.

Worked example using assumed inputs

An 8 fl oz jar holding 7.5 oz of water, soy wax at 0.86, 8% fragrance of wax weight, 12 candles and 5% extra:

  • Per candle: 7.5 × 0.86 = 6.45 oz pour, 5.97 oz wax, 0.48 oz fragrance oil.
  • Batch: 5.97 × 12 × 1.05 = 75.25 oz (4.70 lb) of wax and 6.02 oz of fragrance oil.

Actual results depend on your materials. Add the spill allowance once, on the batch line, not on the per-candle line as well.

Why the record matters

  • Wax lots and oils change. Writing down the supplier and lot helps explain why a repeat batch frosts or smells weaker.
  • Temperatures matter. Many problems, from wet spots to frosting, trace back to pour temperature or a cold jar.
  • Wicks are tested, not guessed. The burn test log is how you decide between two wick sizes. See how to choose the right wick size.